How to Install a Wine Guardian Ceiling-Mounted Cooling Unit
Watch the official installation walkthrough for Wine Guardian ceiling-mounted wine cellar cooling units, covering evaporator placement, mounting, refrigerant line routing, condensate drainage, and startup.
A ceiling-mounted system places the evaporator unit at ceiling level inside the wine cellar, keeping floor and rack space free, while refrigerant lines connect it to a remote condensing unit outside the room. The video below shows how the process works for the Wine Guardian CS025 Ceiling and CS050 Ceiling models, so you can see what the job involves before you order or schedule an installer.
Ceiling-Mounted System Installation: CS025 Ceiling, CS050 Ceiling
This walkthrough applies to Wine Guardian ceiling-mounted split configurations, where the cooling coil hangs inside the cellar and the condensing section sits in a remote location. The video covers:
- Choosing the mounting location. Where the evaporator sits on the cellar ceiling, and the clearances needed around it for airflow and future service access.
- Hanging and securing the unit. Supporting the unit from the ceiling structure and setting it level so condensate drains correctly.
- Refrigerant line routing. How the line set runs from the cellar to the remote condensing unit, and why line length and routing must stay within the model's specifications.
- Condensate drain. Running a properly sloped drain line so moisture removed from the cellar air leaves the room reliably.
- Control wiring and startup. Connecting controls at a high level and what first power-up looks like.
The written companion to this video is the model manual and CAD drawing for your unit, both linked from the manuals library.
Can I install a ceiling-mounted wine cellar cooling unit myself?
Ceiling-mounted Wine Guardian systems are split configurations, and connecting the refrigerant line set is work for an EPA-certified HVAC professional. A homeowner or contractor can typically prepare the mounting structure, drain routing, and electrical supply, but the refrigerant connections, charging, and commissioning should be done by a licensed technician.
Where does the condensing unit go with a ceiling-mounted system?
The condensing section installs in a remote location such as a mechanical room, garage, or approved outdoor position, connected to the cellar unit by the refrigerant line set. The location must stay within the line-length limits in the model's specifications and have enough airflow to reject heat.
Does a ceiling-mounted unit need a condensate drain?
Yes. The evaporator removes moisture from the cellar air as it cools, and that condensate must leave through a drain line with continuous slope. Planning the drain path is one of the first steps in choosing the mounting location.
Which Wine Guardian models are ceiling mounted?
The CS025 Ceiling and CS050 Ceiling models are the ceiling-mounted versions of the Wine Guardian ductless split line. Wall-hung CS versions of the same capacities are available if ceiling mounting does not suit the room.
How much clearance does the unit need at the ceiling?
Clearance requirements are model specific and shown in the CAD drawing for each unit, covering space for airflow around the coil and access for service. Confirm the exact dimensions from the drawing before framing or finishing the ceiling.
Ceiling-Mounted Models Shown in This Video
All ductless split models with prices and full specifications: Ductless Split Cooling Systems.
Not Sure a Ceiling Mount Fits Your Cellar?
Send your cellar dimensions and equipment location options, and a specialist will confirm sizing and configuration before you order.
This guidance is general and intended to help narrow the selection. Final sizing, installation design, electrical requirements, and configuration should be confirmed with Wine Guardian's official documentation and a licensed HVAC professional or qualified contractor.