Wine Guardian Manuals, Spec Sheets, and Documentation

Use the model search above, or open the accordion for your system type below (Through-the-Wall, Self-Contained Ducted, Ducted Split, Ductless Split, Water-Cooled, Pro Series, Cabinet, Humidifier, or Remote Interface) and find your exact model number in the Model column next to its manual link.

The quick start guide covers first power-up and basic setup in a few pages. The full manual covers complete installation requirements, wiring, clearances, and troubleshooting. Installers typically need the full manual, while an owner doing initial setup often only needs the quick start guide.

The spec sheet lists capacity, dimensions, electrical requirements, and sound ratings for planning and comparison. The CAD drawing gives dimensioned line drawings for cutout and clearance layout. Contractors and architects typically need the CAD drawing, while buyers comparing models typically need the spec sheet.

This library covers Wine Guardian models currently sold in the US. If you own an older or discontinued Wine Guardian system, contact us with the model number from the unit's nameplate and we will help locate the correct document set for your unit.

The model number is printed on the nameplate on the unit itself, usually near the electrical connection or on an interior housing panel. If the nameplate is not legible, the quick start guide for your system type shows where the nameplate is typically located.