Free sizing consultation · Call 1-800-260-1712
Free expert consultation on sizing and setup.
Wine Guardian D200 Ducted Wine Cellar Cooling System - Base Model is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Tracking is provided when the order ships from Wine Guardian
Wine Guardian D200 Ducted Wine Cellar Cooling System
THINKING ABOUT THE PERFECT WINE CELLAR? Save time and money: get expert advice before you buy
Call our Wine Cellar Specialist at 1 (800) 260-1712 for FREE CONSULTATION!
The Wine Guardian D200 is a self-contained, air-cooled, fully ductable wine cellar cooling unit rated 15,350 BTU/h on a 208 V supply and 15,680 BTU/h on a 230 V supply, both at 80°F condenser inlet air, and published for wine cellars of 1,500 to 7,000 cubic feet.
Wine Guardian's stated basis for every ducted capacity figure is "Cooling capacity rated at 80°F ambient." The D200 appears on the ducted specifications sheet under two voltage columns, 208/1/60 and 230/1/60, and the rated output is not the same in both, so the figure that applies to a project depends on the supply the equipment space actually delivers. Wine Guardian publishes the model's overall capacity range as 8,000 to 15,680 BTU/h.
The D200 is sized for large residential cellars and for commercial storage rooms, restaurants and wine bars, the type of project worked through in our profile of a commercial restaurant wine room and how its climate control was specified. Because the unit installs outside the wine room and conditions it through insulated ductwork, the cellar stays quiet and uncluttered, with every inch of space free for storage. It holds a wine room at 55°F to 58°F and reports humidity, and it reaches 55% to 65% relative humidity when a Wine Guardian humidifier is added.
Every unit is supplied with a coated evaporator coil, a pre-wired and tested Wireless2Base remote interface controller for mounting in the cellar, an aluminum chassis with UL-rated composite panels, and Wine Guardian fail-safe protection. As an authorized Wine Guardian dealer we list the D200 with full manufacturer specifications so you can compare and size it correctly. Final sizing should be confirmed with the Wine Guardian cooling calculator and a licensed HVAC professional or qualified contractor.
See how the Wine Guardian ducted cooling system installs outside the wine room and conditions the cellar through insulated ductwork.
Questions about fit? Call our specialists at (800) 260-1712.
The D200 is the right choice when the calculated heat load lands inside Wine Guardian's published 1,500 to 7,000 cubic foot range for the model and the unit can be mounted outside the wine room with duct runs short enough to serve it. That load is set by the room before it is set by the equipment, so our breakdown of wine cellar insulation R-values, materials and their effect on cooling load is worth reading while the walls are still open.
The D200 combines a one-piece ducted chassis, a remote-mounted controller and Wine Guardian fail-safe protection, so the equipment stays outside the cellar while conditions inside are held and monitored continuously.
| Feature | What it means for your cellar |
|---|---|
| Self-contained ducted design | Evaporator, fans, compressor, condenser and controls sit in one unit outside the cellar, so the wine room stays quiet and clutter-free. |
| Air-cooled heat rejection | Condenser heat is exhausted outdoors or into a space at least three times larger than the wine room, keeping the cellar itself undisturbed. |
| Dual voltage rating, 208 V and 230 V | The same unit runs on either single-phase supply, at 15,350 BTU/h on 208 V and 15,680 BTU/h on 230 V at 80°F condenser inlet air. |
| Coated evaporator coil | Protects the evaporator side against corrosion for durable performance over a long service life in a humid cellar. |
| Wireless2Base remote interface controller | Supplied pre-wired and tested for remote mounting in the cellar; it sets temperature, reports humidity and can be placed in a kitchen, den or elsewhere. |
| Precision control, ±1°F and ±10% RH | Holds wine-storage conditions of 55°F to 58°F, and reaches 55% to 65% relative humidity when a Wine Guardian humidifier is installed and enabled. |
| Aluminum chassis with UL-rated composite panels | Resists dents and scratches during shipping and installation, and keeps the cabinet stable in an equipment room. |
| Field-serviceable, multi-panel access | Panels, duct collars and grille remove with a couple of screwdriver turns, so service happens on site rather than at the factory. Allow 3 feet of clearance for that work. |
| Optional bundles and humidification | All Wine Temperatures extends the setpoint band to 45°F to 64°F, Serving Temperature to 42°F to 64°F, and Extreme Climate Protection adds factory low and high ambient protection from 20°F to 95°F. |
Built-in protection: the system continuously checks conditions through remote air sensing and adjusts before temperature or humidity drift can affect the collection.
Wine Guardian does not publish a decibel rating for its ducted units, so there is no D200 dBA figure to quote; on a ducted system the dominant noise factor is placement, and the D200 installs outside the wine room and connects through insulated ductwork, which keeps the compressor and fans out of the space you occupy.
Wine Guardian rates the D200 at 15,350 BTU/h on 208 V and 15,680 BTU/h on 230 V at 80°F condenser inlet air, and publishes net capacity at 60°F, 70°F, 80°F and 90°F condenser inlet air for both voltages.
Wine Guardian's ducted specifications sheet prints minimum circuit ampacity and the electric heat option in combined cells that we do not reproduce here. Take both figures from the manufacturer's sheet and have a licensed electrician size the circuit and overcurrent protection to national and local codes.
The D200 requires 12 in round duct as a minimum, so confirm collar and duct sizing against the installation manual before ordering. Accessory availability and pricing are shown on each product page. An integrated or freestanding Wine Guardian humidifier is what takes the cellar to 55% to 65% relative humidity.
The D200 is the largest self-contained ducted unit Wine Guardian builds, and the choice between it and the D088 below it comes down to the calculated heat load rather than to headline capacity.
| Decision factor | D050 | D088 | D200 |
|---|---|---|---|
| Rated cooling at 80°F condenser inlet air | 6,320 BTU/h at 115 V | 9,420 BTU/h at 208 V; 9,600 BTU/h at 230 V | 15,350 BTU/h at 208 V; 15,680 BTU/h at 230 V |
| Published cellar volume | 650 to 3,000 cubic feet | 850 to 4,500 cubic feet | 1,500 to 7,000 cubic feet |
| Supply voltage | 115/1/60 | 208-230/1/60 | 208-230/1/60 |
| Typical application | Mid-size residential cellar | Large residential cellar | Large residential and commercial cellar |
Best for: choose the D200 when the calculated load runs past what the D088 covers, or the cellar is above roughly 4,500 cubic feet. Not ideal for: a cellar whose load sits inside the D088's 850 to 4,500 cubic foot band, or a building with only a 115 V circuit available, where the D050 is the unit that matches the supply.
If you are still choosing a configuration, compare the D200 against the rest of the Wine Guardian ducted cooling units, including the water-cooled and split variants. If the cellar size is what you are working from, the D200 sits alongside the other cooling units for commercial cellars of 4,500 to 7,000 cubic feet.
SELF-CONTAINEDD025 Ducted UnitCompact ducted cooling for cellars of 250 to 2,000 cubic feet.View product
SELF-CONTAINEDD050 Ducted UnitMid-size ducted cooling for cellars of 650 to 3,000 cubic feet.View product
SELF-CONTAINEDD088 Ducted UnitHigh-capacity ducted cooling for cellars of 850 to 4,500 cubic feet.View product
Compare the full ducted range or talk to us about sizing the D200 for your space. This guidance is general and is meant to help narrow the selection; final sizing, installation design, and electrical requirements should be confirmed with Wine Guardian documentation and a licensed HVAC professional.
Curious what it's like to hire a wine cooling expert? Discover how Wine Guardian Dealer helps collectors avoid costly mistakes and create flawless wine cellar environments. From system sizing to...
Building a wine cellar isn’t like framing a spare room. Even experienced pros make critical mistakes that lead to spoiled wine, mold, or failed systems. In this guide from Wine...
Large wine cellars demand precision, power, and quiet cooling. Discover top ducted and split systems curated by Wine Guardian Dealer for ultimate reliability.
Don’t wait for a costly surprise. Wine Guardian Dealer breaks down the top 5 signs your wine cooling system may be failing — and how to fix it before damage...
Not every wine cellar needs a humidifier — but many should. This guide from Wine Guardian Dealer helps you understand when humidity control is critical, what goes wrong without it,...
Wine cooling systems can cost anywhere from $1,800 to $13,000+. This guide breaks down unit costs, install factors, and hidden expenses you should plan for.
Humidity is just as vital as temperature in your wine cellar. Learn how to protect corks, prevent spoilage, and maintain the perfect balance year-round.
Discover how proper vapor barrier installation protects your wine cellar from mold and moisture damage. Real examples, expert tips, and visual guidance included.
The Wine Guardian D200 is a self-contained, air-cooled, fully ductable wine cellar cooling unit rated 15,350 BTU/h on a 208 V supply and 15,680 BTU/h on a 230 V supply, both at 80°F condenser inlet air, and published for wine cellars of 1,500 to 7,000 cubic feet.
Wine Guardian's stated basis for every ducted capacity figure is "Cooling capacity rated at 80°F ambient." The D200 appears on the ducted specifications sheet under two voltage columns, 208/1/60 and 230/1/60, and the rated output is not the same in both, so the figure that applies to a project depends on the supply the equipment space actually delivers. Wine Guardian publishes the model's overall capacity range as 8,000 to 15,680 BTU/h.
The D200 is sized for large residential cellars and for commercial storage rooms, restaurants and wine bars, the type of project worked through in our profile of a commercial restaurant wine room and how its climate control was specified. Because the unit installs outside the wine room and conditions it through insulated ductwork, the cellar stays quiet and uncluttered, with every inch of space free for storage. It holds a wine room at 55°F to 58°F and reports humidity, and it reaches 55% to 65% relative humidity when a Wine Guardian humidifier is added.
Every unit is supplied with a coated evaporator coil, a pre-wired and tested Wireless2Base remote interface controller for mounting in the cellar, an aluminum chassis with UL-rated composite panels, and Wine Guardian fail-safe protection. As an authorized Wine Guardian dealer we list the D200 with full manufacturer specifications so you can compare and size it correctly. Final sizing should be confirmed with the Wine Guardian cooling calculator and a licensed HVAC professional or qualified contractor.
See how the Wine Guardian ducted cooling system installs outside the wine room and conditions the cellar through insulated ductwork.
Questions about fit? Call our specialists at (800) 260-1712.
The D200 is the right choice when the calculated heat load lands inside Wine Guardian's published 1,500 to 7,000 cubic foot range for the model and the unit can be mounted outside the wine room with duct runs short enough to serve it. That load is set by the room before it is set by the equipment, so our breakdown of wine cellar insulation R-values, materials and their effect on cooling load is worth reading while the walls are still open.
The D200 combines a one-piece ducted chassis, a remote-mounted controller and Wine Guardian fail-safe protection, so the equipment stays outside the cellar while conditions inside are held and monitored continuously.
| Feature | What it means for your cellar |
|---|---|
| Self-contained ducted design | Evaporator, fans, compressor, condenser and controls sit in one unit outside the cellar, so the wine room stays quiet and clutter-free. |
| Air-cooled heat rejection | Condenser heat is exhausted outdoors or into a space at least three times larger than the wine room, keeping the cellar itself undisturbed. |
| Dual voltage rating, 208 V and 230 V | The same unit runs on either single-phase supply, at 15,350 BTU/h on 208 V and 15,680 BTU/h on 230 V at 80°F condenser inlet air. |
| Coated evaporator coil | Protects the evaporator side against corrosion for durable performance over a long service life in a humid cellar. |
| Wireless2Base remote interface controller | Supplied pre-wired and tested for remote mounting in the cellar; it sets temperature, reports humidity and can be placed in a kitchen, den or elsewhere. |
| Precision control, ±1°F and ±10% RH | Holds wine-storage conditions of 55°F to 58°F, and reaches 55% to 65% relative humidity when a Wine Guardian humidifier is installed and enabled. |
| Aluminum chassis with UL-rated composite panels | Resists dents and scratches during shipping and installation, and keeps the cabinet stable in an equipment room. |
| Field-serviceable, multi-panel access | Panels, duct collars and grille remove with a couple of screwdriver turns, so service happens on site rather than at the factory. Allow 3 feet of clearance for that work. |
| Optional bundles and humidification | All Wine Temperatures extends the setpoint band to 45°F to 64°F, Serving Temperature to 42°F to 64°F, and Extreme Climate Protection adds factory low and high ambient protection from 20°F to 95°F. |
Built-in protection: the system continuously checks conditions through remote air sensing and adjusts before temperature or humidity drift can affect the collection.
Wine Guardian does not publish a decibel rating for its ducted units, so there is no D200 dBA figure to quote; on a ducted system the dominant noise factor is placement, and the D200 installs outside the wine room and connects through insulated ductwork, which keeps the compressor and fans out of the space you occupy.
Wine Guardian rates the D200 at 15,350 BTU/h on 208 V and 15,680 BTU/h on 230 V at 80°F condenser inlet air, and publishes net capacity at 60°F, 70°F, 80°F and 90°F condenser inlet air for both voltages.
Wine Guardian's ducted specifications sheet prints minimum circuit ampacity and the electric heat option in combined cells that we do not reproduce here. Take both figures from the manufacturer's sheet and have a licensed electrician size the circuit and overcurrent protection to national and local codes.
The D200 requires 12 in round duct as a minimum, so confirm collar and duct sizing against the installation manual before ordering. Accessory availability and pricing are shown on each product page. An integrated or freestanding Wine Guardian humidifier is what takes the cellar to 55% to 65% relative humidity.
The D200 is the largest self-contained ducted unit Wine Guardian builds, and the choice between it and the D088 below it comes down to the calculated heat load rather than to headline capacity.
| Decision factor | D050 | D088 | D200 |
|---|---|---|---|
| Rated cooling at 80°F condenser inlet air | 6,320 BTU/h at 115 V | 9,420 BTU/h at 208 V; 9,600 BTU/h at 230 V | 15,350 BTU/h at 208 V; 15,680 BTU/h at 230 V |
| Published cellar volume | 650 to 3,000 cubic feet | 850 to 4,500 cubic feet | 1,500 to 7,000 cubic feet |
| Supply voltage | 115/1/60 | 208-230/1/60 | 208-230/1/60 |
| Typical application | Mid-size residential cellar | Large residential cellar | Large residential and commercial cellar |
Best for: choose the D200 when the calculated load runs past what the D088 covers, or the cellar is above roughly 4,500 cubic feet. Not ideal for: a cellar whose load sits inside the D088's 850 to 4,500 cubic foot band, or a building with only a 115 V circuit available, where the D050 is the unit that matches the supply.
If you are still choosing a configuration, compare the D200 against the rest of the Wine Guardian ducted cooling units, including the water-cooled and split variants. If the cellar size is what you are working from, the D200 sits alongside the other cooling units for commercial cellars of 4,500 to 7,000 cubic feet.
SELF-CONTAINEDD025 Ducted UnitCompact ducted cooling for cellars of 250 to 2,000 cubic feet.View productSELF-CONTAINEDD050 Ducted UnitMid-size ducted cooling for cellars of 650 to 3,000 cubic feet.View productSELF-CONTAINEDD088 Ducted UnitHigh-capacity ducted cooling for cellars of 850 to 4,500 cubic feet.View product
Compare the full ducted range or talk to us about sizing the D200 for your space. This guidance is general and is meant to help narrow the selection; final sizing, installation design, and electrical requirements should be confirmed with Wine Guardian documentation and a licensed HVAC professional.
Cooling Unit Options
