Free sizing consultation · Call 1-800-260-1712
Free expert consultation on sizing and setup.
Wine Guardian Wall Sleeve For TTW Installation 71H0351-02-D is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Tracking is provided when the order ships from Wine Guardian
Wine Guardian Wall Sleeve For TTW Installation 71H0351-02-D
THINKING ABOUT THE PERFECT WINE CELLAR? Save time and money: get expert advice before you buy
Call our Wine Cellar Specialist at 1 (800) 260-1712 for FREE CONSULTATION!
The Wine Guardian Wall Sleeve, listed here as part 71H0351-02-D, is the framing sleeve that lines the opening in a cellar wall so a through-the-wall Wine Guardian unit can be slid into a square, sealed aperture rather than a raw stud bay.
This listing is the sleeve on its own. Wine Guardian's separately catalogued item, Wall Sleeve and Hardware 94H0054-00, is the sleeve supplied together with the installation hardware, and is the one Wine Guardian describes as covering a through-the-wall or SS018 wall sleeve installation. Decide which of the two you need before ordering. As an authorized Wine Guardian dealer we supply genuine Wine Guardian parts.
The one dimension that decides a sleeve purchase is the wall opening it sits in. Wine Guardian's Through-the-Wall Quick Start Installation Guide gives the sleeve opening as 14-1/2 inches wide by 16-1/4 inches high (36.8 by 41.3 cm), inside of stud to inside of stud, and routes Classic series units past the sleeve steps to a mounting bracket and platform method instead.
Wine Guardian does not publish a model list against the part number 71H0351-02-D. What it does publish is the sleeve method itself: the Through-the-Wall Quick Start Installation Guide walks Sentinel and Defender units into an EasyMount sleeve, and sends Classic series units past those steps to a mounting bracket and platform instead.
So the question to settle first is which series your unit is, and you can tell them apart across the through-the-wall range. Because Wine Guardian's current published parts catalogue lists the wall sleeve as part 94H0054-00, read the part number from the sleeve or the data plate on your unit and check it against Wine Guardian's parts list before ordering, rather than ordering from the wall opening alone.
The sleeve is the wall-preparation half of a through-the-wall install. The exhaust collar and ducting are the other half, and are ordered separately.
Browse the full range in Parts and Accessories.
The 94H0054-00 sleeve and hardware is the alternative listing, sleeve together with hardware. If the exhaust has to be carried away from the back of the wall as well, that is the 94H0010-00 collar and duct kit or the 19H0018-00 collar on its own.
Our team can help confirm which wall sleeve listing matches your through-the-wall unit. Framing, opening size, sealing and installation should be confirmed with official Wine Guardian documentation and a qualified contractor or licensed HVAC professional.
Curious what it's like to hire a wine cooling expert? Discover how Wine Guardian Dealer helps collectors avoid costly mistakes and create flawless wine cellar environments. From system sizing to...
Building a wine cellar isn’t like framing a spare room. Even experienced pros make critical mistakes that lead to spoiled wine, mold, or failed systems. In this guide from Wine...
Large wine cellars demand precision, power, and quiet cooling. Discover top ducted and split systems curated by Wine Guardian Dealer for ultimate reliability.
Don’t wait for a costly surprise. Wine Guardian Dealer breaks down the top 5 signs your wine cooling system may be failing — and how to fix it before damage...
Not every wine cellar needs a humidifier — but many should. This guide from Wine Guardian Dealer helps you understand when humidity control is critical, what goes wrong without it,...
Wine cooling systems can cost anywhere from $1,800 to $13,000+. This guide breaks down unit costs, install factors, and hidden expenses you should plan for.
Humidity is just as vital as temperature in your wine cellar. Learn how to protect corks, prevent spoilage, and maintain the perfect balance year-round.
Discover how proper vapor barrier installation protects your wine cellar from mold and moisture damage. Real examples, expert tips, and visual guidance included.
The Wine Guardian Wall Sleeve, listed here as part 71H0351-02-D, is the framing sleeve that lines the opening in a cellar wall so a through-the-wall Wine Guardian unit can be slid into a square, sealed aperture rather than a raw stud bay.
This listing is the sleeve on its own. Wine Guardian's separately catalogued item, Wall Sleeve and Hardware 94H0054-00, is the sleeve supplied together with the installation hardware, and is the one Wine Guardian describes as covering a through-the-wall or SS018 wall sleeve installation. Decide which of the two you need before ordering. As an authorized Wine Guardian dealer we supply genuine Wine Guardian parts.
The one dimension that decides a sleeve purchase is the wall opening it sits in. Wine Guardian's Through-the-Wall Quick Start Installation Guide gives the sleeve opening as 14-1/2 inches wide by 16-1/4 inches high (36.8 by 41.3 cm), inside of stud to inside of stud, and routes Classic series units past the sleeve steps to a mounting bracket and platform method instead.
Wine Guardian does not publish a model list against the part number 71H0351-02-D. What it does publish is the sleeve method itself: the Through-the-Wall Quick Start Installation Guide walks Sentinel and Defender units into an EasyMount sleeve, and sends Classic series units past those steps to a mounting bracket and platform instead.
So the question to settle first is which series your unit is, and you can tell them apart across the through-the-wall range. Because Wine Guardian's current published parts catalogue lists the wall sleeve as part 94H0054-00, read the part number from the sleeve or the data plate on your unit and check it against Wine Guardian's parts list before ordering, rather than ordering from the wall opening alone.
The sleeve is the wall-preparation half of a through-the-wall install. The exhaust collar and ducting are the other half, and are ordered separately.
Browse the full range in Parts and Accessories.
The 94H0054-00 sleeve and hardware is the alternative listing, sleeve together with hardware. If the exhaust has to be carried away from the back of the wall as well, that is the 94H0010-00 collar and duct kit or the 19H0018-00 collar on its own.
Our team can help confirm which wall sleeve listing matches your through-the-wall unit. Framing, opening size, sealing and installation should be confirmed with official Wine Guardian documentation and a qualified contractor or licensed HVAC professional.
